• Render Plus

Ezycoat Sand 800

Ezycoat Sand 800 is an acrylic texture finish. It consists of a coarse grade of quartz fillers and marble mixed with binders integrated with in a mixture of acrylic emulsion and pigments. This decorative granular finish emulates what mother nature has taken a lifetime to produce, with the assistance of extreme temperature and pressure creating a fusion of various mineral particles. Ezycoat Sand 800 replicates this product giving you versatility in extending the decorative finish parameters. Ezycoat Sand 800 joins the range of decorative finishes to provide a product that has been specifically designed as a top coat to various cementious render and skim rendered surfaces. Its coarse granular appearance makes it attractive for use over a variety of fibre cement cladding systems and precast concrete surfaces. Ezycoat Sand 800 is a one part product that once mixed is ready for immediate use straight from the pail. The coarse granular particles allow Ezycoat Sand 800 to be troweled on in a one coat application, with the ability to cater for minor imperfections which may exist in the surface.



Ezycoat Sand 800 is a pre blended Acrylic Texture that produces a granular sand like finish with ease of application. Its slightly coarse grain and irregular particle size gives it a unique and plush finish.


Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene Cladding, Koolwall Panel, Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.


Ezycoat Sand 800 is applied by steel trowel and finished using a plastic float or a sponge for a sand finish.



Use

Ezycoat Sand 800 has been designed to produce a highly decorative external synthetic finish which is suitable for application to a variety of surfaces that would not normally accept a traditional render or modified skim render. Ezycoat Sand 800 is ideally suited for application over propriety installed Fibre cement sheeted surfaces.


Its ability to adhere to smooth surfaces and its flexible nature make it suitable for this type of application. It also suitable for use as a finish over existing Ezycoat Textured finishes & traditional rendered or Ezycoat EzySkim Render, Ezypump, ECA and Ezycoat Super 6 surfaces.


When applying Ezycoat Sand 800 to any surface it is recommended that the surfaces be free of any contaminant which may affect the performance of the coatings and that any visible imperfections in the surface which may be transferred through to the finished surface be patched using Ezycoat Coarse or Smooth Patch.(see Ezycoat Coarse Patch and Smooth Patch Technical Data sheets for further advice.)



Data Sheet

Consumption: 1 Coat – 8 to 10 sqm. per 15L.

Pail Size: 15Litre.

Classification: non-dangerous goods.

Colours: White, other colours available upon request.

Important Notes: Do not apply in temperatures below 10 degrees Celsius or 24 hrs prior to or after wet & rainy conditions. Do not apply in moist conditions. All walls must be free of moisture prior to application. All surfaces should be cleaned and free of any contaminant, releasing agent, fungal growth which may affect the performance of these coatings. Any imperfections which may become visible in the finished surface should be patched and leveled with Ezycoat Patching compounds. Any structural imperfections and/or cracks will need to stabilised prior to any further applications. The durability of the product in its original confection is guaranteed for 1 year as long as it is not exposed to direct sunlight or temperatures below 6 degrees. Ezycoat Sand 800 is not suitable for use in areas prone to water logging, submersion, continually damp and/or below ground. Walls were Ezycoat Sand 800 is to be applied must be free draining. In the case of retaining walls the rear of the wall must be engineered to prevent any penetration of moisture or water through the wall in to the rear of the Ezycoat Sand 800. Failure to do so will result in damage to the Ezycoat Sand 800 and is not covered by warranty. Excess Waste product should be disposed of in responsible manner following guidelines as set out by the local council’s bi-laws and Waste Disposal Procedures.


Stay tuned for more posts and check out our social media for weekly updates!


GetTechnical • RenderPlus • PolystyreneCladdingSystem • Texture • Ezycoat • CodeMark • BuildingSolutions • Construction


*source https://www.activebuildingsystems.com.au/ezycoat-texture-sand-800/

© 2019 Render Plus Pty Ltd

render_plus_acrylic_render_eps_cladding_
render_plus_acrylic_render_eps_cladding_
  • Facebook - Grey Circle
  • Instagram - Grey Circle
  • Twitter - Grey Circle
  • LinkedIn - Grey Circle